VISEC-modules for high-performance dosing-systems
For bonding, sealing, filling, casting and process-controlled dosing
Essentially, VISEC started off as an elastomer manufacturer and this is still the core focus. Over time customers for VISEC elastomers began asking about precision dispensing systems related to dosing and dispensing the elastomers which gave VISEC the idea to create the primary components for Progressive Cavity (PC) pumps; Rotors and Stators.
PC pumps are extremely gentle and precise and they’re used in a wide range of precision dispensing applications including pharma, cosmetics and original equipment manufacturing.
About VISEC
Elastomer compounds developed and tested by SEC ensure the high quality of VISEC-stators. Your benefit: Extremely low wear in continuous operation due to rubber’s highest chemical and thermal resistance.
Stators and Rotor Units
Designed to use with high-end dispenser systems for precise dosing of highly viscous liquids. Made to be conveyed proportionally to rotational speed with high repeat accuracy for abrasive media.
Micro Stators and Rotor Units
Suitable for process-controlled, pulse-free microdosing techniques. The VISEC modules have the ability to accurately dose a variety of media with the least amount of material possible.
Product Range
Stator VISEC 3R8
Description:
– Item no. P03.3R08 stainless steel/hi-pro
– Item no. P04.3R08 stainless steel/hi-per
– Item no. P05.3R08 stainless steel/hi-act
Technical specifications:
– Dosing volume: 0,35 cc/rev
– Volume flow: 0,35 – 42,0 cc/min
– Minimum dosing quantity: 0,03 cc
– Repeatability: > 99 %
Base:
PCP process cavity pump
Media:
– Anaerobic adhesives
– Shear-sensitive adhesives
– UV adhesives
– Thermosetting adhesives
– 1K and 2K epoxy resins
– Heat transfer compounds
– FDA-compliance possible
Stator VISEC 3R10
Description:
– Item no. P03.3R10 stainless steel/hi-pro
– Item no. P04.3R10 stainless steel/hi-per
– Item no. P05.3R10 stainless steel/hi-act
Technical specifications:
– Dosing volume: 1,1 cc/rev
– Volume flow: 1,1 – 132,0 cc/min
– Minimum dosing quantity: 0,09 cc
– Repeatability: > 99 %
Base:
PCP process cavity pump
Media:
– Anaerobic adhesives
– Shear-sensitive adhesives
– UV adhesives
– Thermosetting adhesives
– 1K and 2K epoxy resins
– Heat transfer compounds
– FDA-compliance possible
Stator VISEC 3R12
Description:
– Item no. P03.3R12 stainless steel/hi-pro
– Item no. P04.3R12 stainless steel/hi-per
– Item no. P05.3R12 stainless steel/hi-act
Technical specifications:
– Dosing volume: 2,30 cc/rev
– V-olume flow: 2,30 – 276,0 cc/min
– Minimum dosing quantity: 0,192 cc
– Repeatability: > 99 %
Base:
PCP process cavity pump
Media:
– Anaerobic adhesives
– Shear-sensitive adhesives
– UV adhesives
– Thermosetting adhesives
– 1K and 2K epoxy resins
– Heat transfer compounds
– FDA-compliance possible
Stator VISEC 2R12-4eQ
Description:
– Item no. P03.2R12 stainless steel/hi-pro
– Item no. P04.2R12 stainless steel/hi-per
– Item no. P05.2R12 stainless steel/hi-act
Technical specifications:
– Dosing volume: 9,10 cc/rev
– Volume flow: 9,10 – 1.092 cc/min
– Minimum dosing quantity: 0,758 cc
– Repeatability: > 99 %
Base:
PCP process cavity pump
Media:
– Anaerobic adhesives
– Shear-sensitive adhesives
– UV adhesives
– Thermosetting adhesives
– 1K and 2K epoxy resins
– Heat transfer compounds
– FDA-compliance possible
Stator VISEC D03 micro
Description:
– Item no. P06.D03 aluminum/hi-tec/purple
Technical specifications:
– Dosing volume: ca. 0,003 cc/rev
– Volume flow: 0,003 to 0,360 cc/min
– Minimum dosing quantity: ca. 0,00025 cc
– Repeatability: > 99%
Base: PCP process cavity pump
Media:
– Anaerobic adhesives
– Shear-sensitive adhesives
– UV adhesives
– Thermosetting adhesives
– 1K and 2K epoxy resins
– Heat transfer compounds
– Cyanacrylat
Stator VISEC D15 micro
Description:
– Item no. P06.D15 aluminum/hi-tec/orange
Technical specifications:
– Dosing volume: 0,01 cc/rev
– Volume flow: 0,01 to 1,2 cc/min
– Minimum dosing quantity: 0,0008 cc
– Repeatability: > 99%
Base:
PCP process cavity pump
Media:
– Anaerobic adhesives
– Shear-sensitive adhesives
– UV adhesives
– Thermosetting adhesives
– 1K and 2K epoxy resins
– Heat transfer compounds
– Cyanacrylat
Stator VISEC D45 micro
Description:
– Item no. P03.D45 aluminum/hi-pro/green
– Item no. P04.D45 aluminum/hi-per/red
– Item no. P05.D45 aluminum/hi-act/black
Technical specifications:
– Dosing volume: 0,05 cc/rev
– Volume flow: 0,05 – 6,0 cc/min
– Minimum dosing quantity: 0,004 cc
– Repeatability: > 99%
Base:
PCP process cavity pump
Media:
– Anaerobic adhesives
– Shear-sensitive adhesives
– UV adhesives
– Thermosetting adhesives
– 1K and 2K epoxy resins
– Heat transfer compounds
– FDA-compliance possible
Stator VISEC D60 micro
Description:
– Item no. P03.D60 aluminum/hi-pro/green
– Item no. P04.D60 aluminum/hi-per/red
– Item no. P05.D60 aluminum/hi-act/black
Technical specifications:
– Dosing volume: 0,14 cc/rev
– Volume flow: 0,14 – 16,0 cc/min
– Minimum dosing quantity: 0,015 cc
– Repeatability: > 99 %
Base:
PCP process cavity pump
Media:
– Anaerobic adhesives
– Shear-sensitive adhesives
– UV adhesives
– Thermosetting adhesives
– 1K and 2K epoxy resins
– Heat transfer compounds
– FDA-compliance possible
Stator VISEC D70 micro
Description:
-Item no. P04.D70 aluminum/hi-per/red
Technical specifications:
-Dosing volume: 0,53 cc/rev
-Volume flow: 0,53 bis 60,0 cc/min
-Minimum dosing quantity: 0,06 cc
-Repeatability: > 99%
Base:
PCP process cavity pump
Media:
– Anaerobic adhesives
– Shear-sensitive adhesives
– UV adhesives
– Thermosetting adhesives
– 1K and 2K epoxy resins
– Heat transfer compounds
– FDA-compliance possible
Rotor unit VISEC UR8
Description:
– Matching stator VISEC 3R8
– Manufacturing process: milled/very high accuracy
– Material: stainless steel 1.4571 / 1.4404
– Hard chrome-plated / different rotor-coatings on option
– Item no.: P21.UR8
Rotor unit VISEC UR10
Description:
– Matching stator VISEC 3R10
– Manufacturing process: milled/very high accuracy
– Material: stainless steel 1.4571 / 1.4404
– Hard chrome-plated / different rotor-coatings on option
– Item no.: P21.UR10
Rotor unit VISEC UR12
Description:
– Matching stator VISEC 3R12
– Manufacturing process: milled/very high accuracy
– Material: stainless steel 1.4571 / 1.4404
– Hard chrome-plated / different rotor-coatings on option
– Item no: P21.UR12
Rotor unit VISEC UR12-4eQ
Description:
– Matching stator VISEC 2R12-4eQ
– Manufacturing process: milled/very high accuracy
– Material: stainless steel 1.4571 / 1.4404
– Hard chrome-plated / different rotor-coatings on option
– Item no: P21.UR124
Rotor unit VISEC UD03 micro
Description:
– Matching stator VISEC D03 micro
– Manufacturing process: milled/very high accuracy
– Material: stainless steel 1.4571 / 1.4404
– Hard chrome-plated / different rotor-coatings on option
– Item no.: P21.UD03
Rotor unit VISEC UD15 micro
Description:
– Matching stator VISEC D15 micro
– Manufacturing process: milled/very high accuracy
– Material: stainless steel 1.4571 / 1.4404
– Hard chrome-plated / different rotor-coatings on option
– Item no.: P21.UD15
Rotor unit VISEC UD45 micro
Description:
– Matching stator VISEC D45 micro
– Manufacturing process: milled/very high accuracy
– Material: stainless steel 1.4571 / 1.4404
– Hard chrome-plated / different rotor-coatings on option
– Item no.: P21.UD45
Rotor unit VISEC UD60 micro
Description:
– Matching stator VISEC D60 micro
– Manufacturing process: milled/very high accuracy
– Material: stainless steel 1.4571 / 1.4404
– Hard chrome-plated / different rotor-coatings on option
– Item no.: P21.UD60
Rotor unit VISEC UD70 micro
Description:
– Matching stator VISEC D70 micro
– Manufacturing process: milled/very high accuracy
– Material: stainless steel 1.4571 / 1.4404
– Hard chrome-plated / different rotor-coatings on option
– Item no.: P21.UD70
The VISEC Plus system.
Reduce Costs and Save Time.
The VISEC Plus system is unique in the market for “high-performance metering systems”. Design adaptations of the pumps to the required stators and rotor units with sometimes complex conversions are no longer necessary. It allows different VISEC stators and rotor units to be used for a specific dosing pump type, making production processes faster and more efficient. Customers are able to react flexibly to the requirements of their markets.
Dosing Pump Type A – For Microdosing
Stator VISEC D03 micro
Stator VISEC D15 micro
Stator VISEC D45 micro
Rotor unit VISEC UD03 micro
Rotor unit VISEC UD15 micro
Rotor unit VISEC UD45 micro
Dosing Pump Type B – For Microdosing
Stator VISEC D60 micro
Stator VISEC D70 micro
Rotor unit VISEC UD60 micro
Rotor unit VISEC UD70 micro
Dosing Pump Type C – For Standard Dosing
Stator VISEC 3R8
Rotor unit VISEC UR8
Dosing Pump Type D – For Standard Dosing
Stator VISEC 3R10
Rotor unit VISEC UR10
Dosing Pump Type E – For Standard Dosing
Stator VISEC 3R12
Stator VISEC 2R12-4eQ
Rotor unit VISEC UR12
Rotor unit VISEC UR12-4eQ
Applications
The optimal solution for automation houses, integrators and dispensing equipment companies for use in development dispensing systems utilizing the core componentry offered by VISEC.
Suitability:
Metering-pumps, dosing systems, precision-volume dosing units, dispensers, mixers for adhesives and sealing compounds.
Industries:
Automotive/e-mobility, aerospace, medical technology, electronics, pharmaceuticals, cosmetics, 3D-printing.
Potting
Potting of self-levelling materials into a specially designed cavity to protect electronic components from chemical or mechanical influences.
Micro Dispensing
Micro dispensing is the application of viscous media in the volume range above one micro-liter. This dosing technique is primarily used for dot-dispensing, bead-dispensing or 2k-dispensing.
Coating
The application of a protective layer is frequently used for components, utilizing highly viscous, thermally or UV-curing materials. Particularly in thin-layer processes and thick-layer processes.
Bonding
Potting of self-levelling materials into a specially designed cavity to protect electronic components from chemical or mechanical influences.
Sealing
Potting of self-levelling materials into a specially designed cavity to protect electronic components from chemical or mechanical influences.
Advantages of VISEC Products
- Special stator material for either abrasive pastes or chemically aggressive liquids (eg electrolytes)
- Special coatings for rotor for abrasive pastes liquids
- Long life span, less production interruptions and maintenance.
- Less spare parts = cost savings
Made-to-measure elastomer compounds by SEC
SEC in Kirchheim/Teck has been in the market for rubber compounds for more than 30 years. SEC creates elastomer compounds based on all common polymers in collaboration with PMG Group, one of the largest FKM compounders globally, from Cenate Sotto near Bergamo. Their carefully tailored fluoro rubber compounds, which are utilized in the stators for dosing technology, are a necessary requirement for process reliability and process accuracy in continuous operation.